Custom Arrows.

Perfectly tuned arrows. Guaranteed.

While our SuperTuning Tuning package includes building and tuning a dozen arrows, we also offer the service separately. We have the ability to fletch in right or left helical from 1 to 4 degrees (don’t know which is best for your setup? Keep reading).

Please contact us for a quote- prices vary wildly depending on chosen components, fletchings, and shafts.

Do I need a left or right helical on my arrow?

Take a bare shaft (arrow with no fletchings) and nock the arrow. Mark the top of the shaft that’s facing up. From three feet, shoot the bare shaft into the target and check to see where your mark is. If your mark is to left- you should shoot a left helical and vice versa.

I’m not sure what arrow spine I need.

This is a highly debated topic and there are opinions on both sides. Personally, we would rather be too stiff than too weak (I can tune a stiff arrow, a weak one isn’t worth the time). Feel free to contact us and we are happy to advise you (whether you’re a client or not).

What brand do you recommend?

If an arrow won’t spin perfectly, we won’t put it in our quiver. For the past few years, we’ve used Victory Arrows and have not had an elite (0.001 straightness) not spin like a top. Another reason we highly recommend Victory arrows for our Super Tuning package is they are SPINE ALIGNED! We do not have a spine tester in our shop! What does spine aligned mean? When a carbon arrow is manufactured, the arrow has a stiff side where the layers meet/the carbon was cut. When an arrow is released from a bow, it flexes and reacts to the energy that was just applied to it. By spine aligning (something that comes standard on victory arrows) we ensure each arrow is going to behave the exact same way after each shot.

Broad Head Sharpening:

We also offer broad head sharpening for fixed blade broad heads. Using Stay Sharp jigs, 10 different sand paper grits, honing compound, and finishing with a leather strop- each head is brought to a mirrored finish. Service starts from $10-$15 per head depending on make and model of your broad head.

Ready to get started? Click here to submit a service request form.